SC752-10 | D | Perfect Binder: Stack overflow sensor detection late error |
When the stacking tray was raised, the stack overflow sensor did not go OFF after the stacking tray lift motor had operated long enough for 70mm lowering. | ||
| ||
|
SC752-11 | D | Perfect Binder: Stacking tray low limit sensor error 1 |
The stacking tray low limit sensor and the stack overflow sensor went ON at the same time. | ||
| ||
|
SC752-12 | D | Perfect Binder: Stack overflow sensor detection position late error |
When the tray was lowered to allow removal of the booklets, the stack overflow sensor did not go OFF, even after the stacking tray lift motor had operated long enough for 40mm of lift. | ||
| ||
|
SC752-13 | D | Perfect Binder: Stacking tray low limit sensor error 2 |
When the stacking tray was lifted, the stack overflow sensor did not go OFF, even though the either (or both) the paper detect sensor (front) or the paper detect sensor (rear) were on while the stacking tray empty sensor was OFF. | ||
| ||
|
SC752-14 | D | Perfect Binder: Stack tray HP sensor late error |
When the tray moved to the home position, the HP sensor did not go ON after enough time for 70mm of movement had elapsed. | ||
| ||
|
SC752-15 | D | Perfect Binder: Stack tray HP sensor lag error |
When the tray moved from the home position, the HP sensor did not go OFF after enough time for 10mm of movement had elapsed. | ||
| ||
|
SC752-16 | D | Perfect Binder: Stack weight move HP sensor late error |
When the tray moved to the home position, the stack weight move HP sensor did not go ON after enough time for 70mm of movement had elapsed. | ||
| ||
|
SC752-17 | D | Perfect Binder: Stack weight HP sensor lag error |
During movement away from the HP sensor, the HP sensor did not go OFF after enough time for 10mm of movement had elapsed. | ||
| ||
|
SC752-18 | D | Perfect Binder: Cover guide HP sensor (left) late error |
During movement toward the HP sensor of the left cover path, the cover guide HP sensor (left) did not go ON after the cover guide motor (left) had operated long enough for 3000 ms of movement. | ||
| ||
|
SC752-19 | D | Perfect Binder: Cover guide (left) HP sensor error |
The cover guide HP sensor (left) and cover guide (left) open sensor went ON at the same time. | ||
| ||
|
SC752-20 | D | Perfect Binder: Left cover guide release position late error |
During movement toward the left cover guide open position, the cover guide open sensor (left) did not go ON after the cover guide motor (left) had operated long enough for 3000 ms of movement. | ||
| ||
|
SC752-21 | D | Perfect Binder: Cover guide (right) HP sensor late error |
During movement toward the HP sensor of the right cover path, the cover guide HP sensor (right) did not go ON after the cover guide motor (right) had operated long enough for 3000 ms of movement. | ||
| ||
|
SC752-22 | D | Perfect Binder: Cover guide (right) sensor error |
The cover guide HP sensor (right) and cover guide (right) open sensor went ON at the same time. | ||
| ||
|
SC752-23 | D | Perfect Binder: Right cover guide release position late error |
During movement toward the right cover guide open position, the cover guide open sensor (right) did not go ON after the cover guide motor (right) had operated long enough for 3000 ms of movement. | ||
| ||
|
SC752-24 | D | Perfect Binder: Registration unit HP late error |
When the cover registration unit moved toward the home position, the cover horizontal registration sensor did not go ON, even after the cover horizontal registration motor had operated for 975 ms. | ||
| ||
|
SC752-25 | D | Perfect Binder: Registration HP sensor lag error |
During operation of the cover registration unit , the cover horizontal registration HP sensor did not go OFF, even after the cover horizontal registration motor had operated for 975 ms. | ||
| ||
|
SC752-26 | D | Perfect Binder: Sub grip HP sensor late error |
During the sub grip lift operation, the sub grip upper HP sensor did not go ON, even though the sub grip lift motor had operated for 4110 ms. | ||
| ||
|
SC752-27 | D | Perfect Binder: Sub grip HP sensor lag error |
During sub grip lowering, the sub grip lower HP sensor did not go OFF, even though the sub grip lift motor had operated for 240 ms. | ||
| ||
|
SC752-28 | D | Perfect Binder: Sub grip size HP sensor late error |
| ||
| ||
|
SC752-29 | D | Perfect Binder: Sub grip size HP sensor lag error |
| ||
| ||
|
SC752-30 | D | Perfect Binder: Sub grip open position late error |
At the start of the sub grip open operation, the SG open sensor did not go ON, even after the SG motor had operated for 1500 ms. | ||
| ||
|
SC752-31 | D | Perfect Binder: Sub grip open position lag error |
At the start of the sub grip close operation, the SG open sensor did not go OFFN, even after the SG motor had operated for 500 ms. | ||
| ||
|
SC752-32 | D | Perfect Binder: Sub grip close position late error |
At the start of the sub grip close operation, the SG close sensor did not go ON, even after the SG motor had operated for 1500 ms. | ||
| ||
|
SC752-33 | D | Perfect Binder: Sub grip close position lag error |
At the start of the sub grip open operation, the SG close sensor did not go OFF, even after the SG motor had operated for 500 ms. | ||
| ||
|
SC752-34 | D | Perfect Binder: Sub grip sensor error |
The SG open sensor and SG close sensor went ON at the same time. | ||
| ||
|
SC752-35 | D | Perfect Binder: Sub grip HP late error |
While moving to the sub grip home position, the sub grip HP sensor did not go ON, even though the sub grip motor had operated for 3000 ms. | ||
| ||
|
SC752-36 | D | Perfect Binder: Sub grip HP position lag error |
While passing the signature, the sub grip HP sensor did not go OFF, even though the sub grip motor had operated for 500 ms. | ||
| ||
|
SC752-37 | D | Perfect Binder: Signature move main grip position late error |
While sub grip was passing the signature, the signature move MG position sensor did not go ON, even though the signature move motor had operated for 3000 ms. At the timing of the movement of the signature from sub grip to main grip, the signature was still gripped by the main grip at the rotation HP sensor. | ||
| ||
|
SC752-38 | D | Perfect Binder: Signature move main grip position lag error |
While moving to the sub grip home position, the signature MG position sensor did not go OFF, even though the signature move motor had operated for 500 ms. | ||
| ||
|
SC752-39 | D | Perfect Binder: Main grip rotate enable position sensor late error |
While moving to the sub grip home position, the MG rotate enable sensor did not go ON, even though the signature move motor had operated for 2475 ms. | ||
| ||
|
SC752-40 | D | Perfect Binder: Main grip rotate enable position sensor lag error |
While passing the signature, the MG rotate enable sensor did not go OFF, even though the signature move motor had operated for 1450 ms. | ||
| ||
|
SC752-41 | D | Perfect Binder: Signature move HP sensor defective |
The signature move HP sensor and signature move MG position sensor went on at the same time. | ||
| ||
|
SC752-42 | D | Perfect Binder: Main grip HP sensor late error |
| ||
| ||
|
SC752-43 | D | Perfect Binder: Main grip HP sensor lag error |
| ||
| ||
|
SC752-44 | D | Perfect Binder: Main grip press sensors(S) position late error |
When lifting from main grip signature registration position, MG press sensor did not go ON, even though the MG lift motor had operated for 95 ms. | ||
| ||
|
SC752-45 | D | Perfect Binder: Main grip press sensor (S) position lag error |
When lowering to main grip signature registration position, MG press sensor (S) did not go OFF, even though the MG lift motor had operated for 5640 ms. | ||
| ||
|
SC752-46 | D | Perfect Binder: Main grip press sensor (L) position late error |
When lowering cover in main grip to press position, MG press sensor (L) did not go ON, even though the MG lift motor had operated for 6185 ms. | ||
| ||
|
SC752-47 | D | Perfect Binder: Main grip press sensor (L) position lag error |
When raising cover in main grip from press position, MG press sensor (L) did not go OFF, even though the MG lift motor had operated for 95 ms. | ||
| ||
|
SC752-48 | D | Perfect Binder: Signature exit sensor late error |
When signature was passed from main grip to signature exit roller, signature exit sensor did not go ON after MG lift motor moved to signature turnover position. | ||
| ||
|
SC752-49 | D | Perfect Binder: Main grip HP sensor (L) late error |
During main grip lift, the MG HP sensor (L) did not go ON, even though the main grip lift motor had operated for 6185 ms. | ||
| ||
|
SC752-50 | D | Perfect Binder: Main grip HP sensor (L) lag error |
During main grip lowering, the MG HP sensor (L) did not go OFF, even though the main grip lift motor had operated for 1455 ms. | ||
| ||
|
SC752-51 | D | Perfect Binder: Main grip rotate HP sensor late error |
| ||
| ||
|
SC752-52 | D | Perfect Binder: Main grip rotate HP sensor lag error |
When rotating signature to main grip binding position, the MG rotate HP sensor did not go OFF, even though the MG rotate motor had operated for 500 ms. | ||
| ||
|
SC752-53 | D | Main grip rotate-to-binding position late error |
When rotating signature to main grip binding position, the MG rotate-to-binding position sensor did not go ON, even though the MG rotate motor had operated for 2250 ms. | ||
| ||
|
SC752-54 | D | Main grip rotate-to-binding position lag error |
When rotating signature to main grip turnover position, MG rotate-to-binding position sensor did not go OFF, even though the MG rotate motor had operated for 500 ms. | ||
| ||
|
SC752-55 | D | Perfect Binder: Main grip rotate sensor error |
The MG rotate HP sensor and MG rotate-to-binding position sensor went on at the same time. | ||
| ||
|
SC752-56 | D | Perfect Binder: Main grip open sensor (R) late error |
At the start of the main grip open operation, the MG open sensor (R) did not go ON, even after the MG motor (R) had operated for 3000 ms. | ||
| ||
|
SC752-57 | D | Perfect Binder: Main grip open sensor (R) lag error |
At the start of the main grip close operation, the MG open sensor (R) did not go OFF, even after the MG motor (R) had operated for 500 ms. | ||
| ||
|
SC752-58 | D | Perfect Binder: Main grip close sensor (R) late error |
At the start of the main grip close operation, the MG clsoe sensor (R) did not go ON, even after the MG motor (R) had operated for 3000 ms. | ||
| ||
|
SC752-59 | D | Perfect Binder: Main grip close sensor (R) lag error |
At the start of the main grip close operation, the MG close sensor (R) did not go OFF, even after the MG motor (R) had operated for 500 ms. | ||
| ||
|
SC752-60 | D | Perfect Binder: Main grip motor (R) rotation error |
At the start of the main grip open operation, the MG encoder sensor (R) was not detected on/off, even after the MG motor (R) had operated for 200 ms. | ||
| ||
|
SC752-61 | D | Perfect Binder: Main grip (R) sensor error |
The MG open sensor (R) and MG close sensor (R) went ON at the same time. | ||
| ||
|
SC752-62 | D | Perfect Binder: Main grip open sensor (F) late error |
At the start of the main grip open operation, the MG open sensor (F) did not go ON, even after the MG motor (R) had operated for 3000 ms. | ||
| ||
|
SC752-63 | D | Perfect Binder: Main grip open sensor (F) lag error |
At the start of the main grip close operation, the MG open sensor (F) did not go OFF, even after the MG motor (F) had operated for 500 ms. | ||
| ||
|
SC752-64 | D | Perfect Binder: Main grip close sensor (F) late error |
At the start of the main grip open operation, the MG clsoe sensor (F) did not go ON, even after the MG motor (F) had operated for 3000 ms. | ||
| ||
|
SC752-65 | D | Perfect Binder: Main grip close sensor (F) lag error |
At the start of the main grip open operation, the MG close sensor (F) did not go OFF, even after the MG motor (F) had operated for 500 ms. | ||
| ||
|
SC752-66 | D | Perfect Binder: Main grip motor (F) rotation error |
At the start of the main grip open/close operation, the MG encoder sensor (F) was not detected on/off, even after the MG motor (F) had operated for 200 ms. | ||
| ||
|
SC752-67 | D | Perfect Binder: Main grip (F) sensor error |
The MG open sensor (F) and MG close sensor (F) went ON at the same time. | ||
| ||
|
SC752-68 | D | Perfect Binder: Signature exit path HP sensor late error |
During signature output roller separation, the signature exit path sensor did not go ON, even after the signature exit path motor was ON for 750 ms. | ||
| ||
|
SC752-69 | D | Perfect Binder: Signature exit path HP sensor lag error |
During signature exit roller nip operation, the signature exit path sensor did not go OFF, even after the signature exit path motor was OFF for 300 ms. | ||
| ||
|
SC752-70 | D | Perfect Binder: Signature path exit press sensor late error |
During signature exit roller nip operation, the signature exit path exit press sensor did not go ON, even after the signature exit path motor operated for 300 ms. | ||
| ||
|
SC752-71 | D | Perfect Binder: Signature path exit press sensor lag error |
During signature output roller separation, the signature exit path press sensor did not go OFF, even after the signature exit path motor was ON for 300 ms. | ||
| ||
|
SC752-72 | D | Perfect Binder: Leading edge sensor late error |
When signature exited at signature path exit roller, the leading edge sensor did not go ON, even after the signature exit roller motor operated long enough to feed the book 45 mm. | ||
| ||
|
SC752-73 | D | Perfect Binder: Cover interposer tray read error |
At power on the data on the EEPROM returned a checksum error when the data were read. | ||
| ||
|
SC752-74 | D | Perfect Binder: Cover interposer tray EEPROM write error |
When data were written to EEPROM, the write data and read data did not match. | ||
| ||
|
SC752-75 | D | Perfect Binder: Drive switch motor error (down to up) |
The rack where the drive gear is mounted did not retract from the drive switch sensor after the drive switch motor operated for 3 s. | ||
| ||
|
SC752-76 | D | Perfect Binder: Drive switch motor error (up to down) error |
The rack where the drive gear is mounted was late arriving at the drive switch sensor after the drive switch motor operated for 3 s. | ||
| ||
|
SC752-77 | D | Perfect Binder: Upper tray low position late error |
The upper tray did not leave the lower limit sensor after the upper tray lift motor had operated for 5 s. | ||
| ||
|
SC752-78 | D | Perfect Binder: Upper tray feed position late error |
The upper tray did not arrive at the PICK sensor after the upper tray lift motor had operated for 5 s. | ||
| ||
|
SC752-79 | D | Perfect Binder: Lower tray low position lag error |
The lower tray did not leave the low limit sensor after the lower tray lift motor had operated for 5 s. | ||
| ||
|
SC752-80 | D | Perfect Binder: Lower tray paper feed position late error |
The lower tray did not leave the lower tray paper feed sensor after the lower tray lift motor had operated for 5 s. | ||
| ||
|
SC752-81 | D | Perfect Binder: Low performance error (or service mode) |
| ||
| ||
|
SC752-82 | B | Perfect Binder: Grip HP sensor lag error |
During operation of the grip unit the HP sensor did not OFF after grip unit moved 20 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-83 | B | Perfect Binder: Grip HP sensor late error |
The HP sensor did not go ON after the grip unit released the signature and moved 76 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-84 | B | Perfect Binder: Grip end sensor lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-85 | B | Perfect Binder: Grip end sensor late error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-86 | B | Perfect Binder: Left trimming buffer HP sensor lag error |
The left trimmings buffer HP sensor did not go OFF within 3 sec. after the trimmings buffer moved away from the sensor. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-87 | B | Perfect Binder: Trimming buffer HP sensor late error |
The left trimmings buffer HP sensor did not go ON within 5 sec. after the trimmings buffer moved toward the sensor. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-88 | B | Perfect Binder: Right trimming buffer HP sensor lag error |
The right trimmings buffer HP sensor did not go OFF within 3 sec. after the trimmings buffer moved away from the sensor. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC752-89 | B | Perfect Binder: Right trimming buffer HP sensor late error |
The right trimmings buffer HP sensor did not go ON within 5 sec. after the trimmings buffer moved toward the sensor. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-10 | B | Perfect Binder: Trimmings buffer motor rotation error |
No encoder lock input received within 50 ms during operation. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-11 | B | Perfect Binder: Thrust plate operation error |
The thrust press plate sensor did not go OFF after the trimmings buffer moved to the left for 3 sec. (blocked by jammed trimming scraps). | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-12 | B | Perfect Binder: Thrust plate retraction error |
The paper press plate sensor did not go ON after the trimmings buffer moved to the right for 3 sec. (blocked by jammed trimming scraps). | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-13 | B | Perfect Binder: Book collection buffer HP sensor error |
The book collection buffer HP sensor did not go OFF within the time prescribed for release of the book in the book buffer. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-14 | B | Perfect Binder: Book collection buffer tray HP sensor late error |
The book collection buffer HP sensor did not go off even after the book buffer tray moved for 3 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-15 | B | Perfect Binder: Press HP sensor lag error |
During press plate operation during trimming, the edge press plate HP sensor did not OFF after it had time to move the prescribed distance. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-16 | B | Perfect Binder: Press plate late error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-17 | B | Perfect Binder: Press end sensor lag jam |
After the press plate released the signature and moved the prescribed distance, the press end sensor did not go OFF. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-18 | B | Perfect Binder: Press end sensor late jam |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-19 | B | Perfect Binder: Slide HP sensor lag error |
When the slide was raised, the slide HP sensor did not go OFF after it moved 180 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-20 | B | Perfect Binder: Slide HP sensor late error |
The slide HP sensor did not go ON after the slide was lowered and had enough time to move 180 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-21 | B | Perfect Binder: Book rotation HP sensor (right) lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-22 | B | Perfect Binder: Book rotation HP sensor (right) late error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-23 | B | Perfect Binder: Book rotation HP sensor (left) lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-24 | B | Perfect Binder: Book rotation HP sensor (left) late error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-25 | B | Perfect Binder: Cutter front HP sensor lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-26 | B | Perfect Binder: Cutter rear HP sensor late error |
When the blade was moved to the rear, it did not arrive at the home position after 122 mm of movement. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-27 | B | Perfect Binder: Cutter rear HP sensor lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-28 | B | Perfect Binder: Cutter front HP sensor late error |
When the blade is moved to the front, the blade did not return to blade sensor 1 after enough time had elapsed for the blade to move 122 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-29 | B | Perfect Binder: Cut end late error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-30 | B | Perfect Binder: Cut end lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-31 | B | Perfect Binder: Book lift tray HP sensor lag error |
During tray lifting, the book tray lift sensor did not go off after 10 sec. had elapsed. The book lift sensor did not go off after enough time had elapsed to move the tray more than 10 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-32 | B | Perfect Binder: Book lift tray HP sensor late error |
While the book lift tray was being lowered, the book lift tray HP sensor did not go on after 1.5 sec. had elapsed. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-33 | B | Perfect Binder: Book lift tray motor rotation error |
No encoder lock input received within 50 ms during operation. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-34 | B | Perfect Binder: Book output tray HP sensor lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-35 | B | Perfect Binder: Book out put tray HP sensor late error |
The book output tray HP sensor did not go ON within 3.5 sec. after it went OFF. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-36 | B | Perfect Binder: Blade cradle HP sensor lag error |
While the blade was retracting to the home position, the blade cradle sensor did not go OFF after enough time had elapsed for the blade to move 12 mm. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-37 | B | Perfect Binder: Blade cradle HP sensor late error |
While the bladed was being lowered, the blade cradle HP sensor did not go ON after enough time had elapsed for 21 mm of movement. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-38 | B | Perfect Binder: Book door lock error |
The book door sensor was detected OFF with the book door locked. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-39 | B | Perfect Binder: Glue heater error |
The glue heater thermistor registered more that 200 degrees for more than 1 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-40 | B | Electrical short in the gluing unit |
A temperature of less than 5 degrees was detected for 1 sec. or more than 10 sec. after power on.) However, if the thermistor detected less than 100 degrees after measuring temperature at start up, temperature is checked again after 50 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-41 | B | Perfect Binder: Glue heater startup error 1 |
Glue temperature thermistor did not detect a temperature of 140 degrees within 200 sec. after it detected a temperature over 50 degrees. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-42 | B | Perfect Binder: Low temperature detection error |
After adjustment of the glue temperature, the glue temperature thermistor detected a temperature lower than 135 degrees for more than 10 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-43 | B | Perfect Binder: High temperature detected in unit |
Thermistor detected abnormal high temperature. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-44 | B | Perfect Binder: Thermostat error |
Abnormal thermostat detection. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-45 | B | Perfect Binder: Glue level thermistor error 1 |
After glue warm-up completed, the glue level thermistor detected a temperature of over 170 degrees for more than10 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-46 | B | Perfect Binder: Glue level thermistor error 2 |
After glue warm-up completed, the glue level thermistor detected a temperature less than 100 degrees for more than10 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-47 | B | Perfect Binder: Thermistor disconnect error |
The glue abnormal temperature thermistor detected a temperature of less than 5 degrees for for 1 sec., or more than 10 sec. after power on. However, if the thermistor detected less than 100 degrees after measuring temperature at start up, temperature is checked again after 50 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-48 | B | Perfect Binder: Glue level thermistor disconnect error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-49 | B | Perfect Binder: Internal temperature thermistor error |
The A/D value of the internal temperature thermostat was detected above 80 degrees for 1 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-50 | B | Perfect Binder: Internal temperature thermostat disconnect error |
The A/D value of the internal temperature thermostat was detected below -20 degrees for 1 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-51 | B | Perfect Binder: Internal temperature thermistor error |
Temperature was detected above 10°C three consecutive times (sampled every sec. for 1 min.). | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-52 | B | Perfect Binder: Glue heater startup error 2 |
The warm-up temperature was above the +-5°C target for the glue vat temperature. (Not detected within 100 sec. after machine warm-up.) | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-53 | B | Perfect Binder: Glue heater startup error 3 |
The warm-up temperature was below the +-5C target for the glue vat temperature. (Not detected within 100 sec. after machine warm-up.) | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-54 | B | Perfect Binder: Glue heater startup error 4 |
At the end of temperature adjustment at power on, warm-up did not complete within 500 sec. The glue vat temperature did not reach the warm-up temperature within 500 sec. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-55 | B | Perfect Binder: Ambient temperature error |
Ambient temperature is not within the operational range: It was between 0°C and -20C. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-56 | B | Perfect Binder: Glue low limit late error |
The level of the glue in the vat was detected below the low limit 4 times. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-57 | B | Perfect Binder: Glue high limit late error |
Without glue application, and with the glue level above the low limit, the glue level thermistor did not detect the level of the glue at the high limit, even after 12 glue pellets were supplied. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-58 | B | Perfect Binder: Glue lowering level error |
Without glue supply, the level of the glue detected by the glue lever thermistor did not lower away from the high limit level, even after application of 25.42 g | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-59 | B | Perfect Binder: Glue level thermistor adjustment value error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-60 | B | Perfect Binder: Timing sensor adjustment high value error |
The timing sensor A/D input value was lower than 3.0 to 3.5V, the A/D input value did not go higher than 3.0 to 3.5V, even after timing sensor D/A output value was higher than 3.5V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-61 | B | Perfect Binder: Cover registration sensor adjustment high value error |
The cover registration sensor A/D input value was lower than 3.0 to 3.5V, the A/D input value did not go higher than 3.0 to 3.5V, even after cover registration sensor output value output was higher than 3.5V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-62 | B | Perfect Binder: Cover horizontal registration sensor (S) adjustment high value error |
The cover horizontal registration sensor (S) A/D input value was lower than 3.2 to 3.54V, and the A/D input value did not go higher than 3.2 to 3.54V, even after cover registration sensor (S) D/A output value output was higher than 3.7V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-63 | B | Perfect Binder: Cover horizontal registration sensor (L) adjustment high value error |
The cover horizontal registration sensor (L) A/D input value was lower than 3.2 to 3.54V, and the A/D input value did not go higher than 3.2 to 3.54V, even after cover horizontal registration sensor (L) D/A output value output was higher than 3.7V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-64 | B | Perfect Binder: Signature exit sensor adjustment high value error |
The signature exit sensor A/D input value was lower than 3.2 to 3.54V, the A/D input value did not go higher than 3.2 to 3.54V, even after cover registration sensor output value output was higher than 3.7V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-65 | B | Perfect Binder: LE detect sensor adjustment high value error |
The leading edge detect sensor A/D input value was lower than 3.2 to 3.54V, and the A/D input value did not go higher than 3.2 to 3.54V, even after cover registration sensor A/D output value output was higher than 3.7V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-66 | B | Perfect Binder: Entrance path sensor adjustment high value error |
When the entrance path sensor was adjusted, the sensor A/D input was less than 2.58 V, even after the sensor D/A output was more than 3.3V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-67 | B | Perfect Binder: Book registration sensor adjustment high value error |
When the book registration sensor was adjusted, the sensor A/D input was less than 2.58 V, even after the sensor D/A output was more than 3.3V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-68 | B | Perfect Binder: Timing sensor adjustment low value error |
The timing sensor A/D input value was higher than 3.0 to 3.5V, the A/D input value did not enter the range 3.0 to 3.5V, even after timing sensor D/A output value was lower than 0.1V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-69 | B | Perfect Binder: Cover registration sensor adjustment low value error |
The cover registration sensor A/D input value was higher than 3.0 to 3.5V, the A/D input value did not enter the range 3.0 to 3.5V, even after cover registration sensor D/A output value output was lowered 0.1V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-70 | B | Perfect Binder: Cover horizontal registration sensor (S) adjustment low value error |
The cover horizontal registration sensor (S) A/D input value was higher than 3.2 to 3.54V, and the A/D input value did enter the range 3.2 to 3.54V, even sensor D/A output value output was lowered 0.04V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-71 | B | Perfect Binder: Cover horizontal registration sensor (L) adjustment low value error |
The cover horizontal registration sensor (L) A/D input value was higher than 3.2 to 3.54V, and the A/D input value did enter the range 3.2 to 3.54V, even sensor D/A output value output was lowered 0.04V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-72 | B | Perfect Binder: Signature exit sensor adjustment low value error |
The signature exit sensor A/D input value was higher than 3.2 to 3.54V, the A/D input value did not enter the range 3.2 to 3.54V, even after cover registration sensor output value output was raised 0.04V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-73 | B | Perfect Binder: LE detect sensor adjustment low value error |
The LE detect sensor A/D input value was higher than 3.2 to 3.54V, and the sensor A/D input value did not enter the range 3.2 to 3.54V, even after the sensor output value was raised 0.04V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-74 | B | Perfect Binder: Entrance path sensor adjustment low value error |
When the entrance path sensor was adjusted, the sensor A/D input was higher than 2.58 V, even after the sensor D/A output was lowered to 0V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-75 | B | Perfect Binder: Book registration sensor adjustment low value error |
When the book registration sensor was adjusted, the sensor A/D input was more than 2.58 V, even after the sensor D/A output was less than 0V. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-76 | B | Perfect Binder: LE detect sensor late error |
The stack was late for gluing to the cover because there was no stack transport end sensor from the slave control board and there was no signal that the LE detect sensor had signaled to arrival of the stack. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-77 | B | Perfect Binder: Trim unit entrance sensor late error |
The stack was late arriving because the trim unit entrance sensor did not go ON even after a transport end signal was received. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753- 78 | B | Perfect Binder: Book registration sensor late error |
At the start of cutter registration, the book registration did not go ON. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-79 | B | Perfect Binder: Signature exit sensor lag error |
When the power was turned on, the cover path was closed and the signature exit sensor detected paper present, but the LE detect sensor had detected no paper present. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-80 | B | Perfect Binder: Entrance path sensor late error |
During the automatic exit operation, the entrance path sensor could not detect any paper within 6860 ms after gluing and stack transport started. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-81 | B | Perfect Binder: Main grip late error |
There was no stack received from the sub grip unit; the main grip signature sensor detected no stack. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-82 | B | Perfect Binder: Trim unit entrance sensor lag error |
At the end of initialization at power on, the entrance path sensor went ON. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-83 | B | Perfect Binder: Book registration sensor lag error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-84 | B | Perfect Binder: Book arrival sensor lag error |
Not detected | ||
| ||
|
SC753-85 | B | Perfect Binder: Trimming jam error |
| ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-86 | B | Perfect Binder: Sub grip unit lag error |
When the sub grip unit was checked for the presence of paper, no paper could be detected even after opening the sub grip unit. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-87 | B | Perfect Binder: Main grip unit lag error |
Although cutter retracted, the absence of paper could not be detected. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-88 | B | Perfect Binder: Signature thickness sensor minimum value error |
When the result of the signature thickness detection (A/D value) was adjusted, the minimum value (0 mm) was smaller than the A/D value of -30. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |
SC753-89 | B | Perfect Binder: Signature thickness sensor maximum value error |
When the result of the signature thickness detection (A/D value) was adjusted, the maximum value (25mm) was smaller than the A/D value. | ||
| ||
After the repairs, cancel the low performance mode, and then turn the power off/on. |