1. Open the VTU (Opening the VTU)

    The sensors can be removed without removing the VTU.

    Each sensor is removed in the same way:

    • Screw (x1)
    • Clamps (x4)
    • Connector (x1)
    • Pawls (x4)

The procedure below describes how to remove the 1st transport sensor. Follow the same procedure to remove any of the other VTU sensors.

  1. Disconnect the sensor bracket at the front [A] (x1).
  2. Disconnect the sensor harness inside the bracket [B] (x3).
  3. Remove the sensor (x1, 4).