1. Open the front doors.
  2. Pull the top tray [A] out until it stops.
  3. Push the right tandem tray [B] back into the machine.

  4. Disconnect the left side of the left tandem tray (x2).

    • These screws on the left are short screws.

  5. Disconnect the right side of the left tandem tray (x3).

    • These screws on the right are longer screws.

  6. Remove the left tandem tray.
  7. Three screws behind the front cover hold it in place.
  8. Disconnect the screw [A] behind the upper left corner of the front cover (x1).
  9. Disconnect the high and low screws that hold the right side of the cover [B] (x1).
  10. Remove the front cover.
  11. Lay the cover face down on a flat, clean surface.
  12. Pull out the right tandem tray.
  13. Disconnect the right side of the right tandem tray (x2). Do not discard these screws!
  14. Remove the right tandem tray.