1. Remove the ITB cleaning unit (ITB Unit Removal)

  2. Remove the cleaning blade (Cleaning Blade)

    • The lubricant roller, lubricant bar, and lubricant blade are always replaced as one set.

  3. At the front, remove:
    [A] Clips (x1)
    [B] Belt (x1)
    [C] Gear (x1)
  4. Slide off the bushing.
  5. At rear, disconnect the end of the roller (x1,x1,x1).
  6. Remove the roller . After the roller is removed, you can see the lubricant bar .