1. Remove the fusing unit.
  2. Remove the rear plate [A] (x3).
  3. Apply Fluotribo MG Grease to drive gears  and .
    • Apply 1.5±0.3 g to
    • Apply 4±0.8 g to
  4. While rotating the gear, lubricate the small gear and all teeth of the circled gear.
  5. Make sure that grease is applied to all the gears.
  6. The photo below shows the maximum and minimum amounts of lubricant to use.
    • Maximum Fluotribo MG Grease 4.0g (on the left)
    • Minimum Fluotribo MG Grease 1.5g (on the right)