1. Open the front doors and pull the drawer out.
  2. Disconnect the support rails, and then remove the rail base. (Support Rails)
  3. Remove the drawer right cover (x5).
  4. Remove the cover [A] (x2).
  5. Disconnect the sensor bracket [B] (x1).
  6. Move the sensor bracket [A] aside.
  7. Remove the plastic cover [B] .
  8. Removed the double-feed sensor 2 bracket (with sensor attached) (x1).
  9. Remove the double-feed sensor 2 (receiver) with bracket attached (x2).
  10. Remove springs at front [A] and rear [B] (x2).
  11. Disconnect the roller at the front (x1).
  12. Remove the roller.
  13. Remove couplings from front [A] and rear [B] so that they do not become lost.
  14. At the front [A], remove the lock plate (x1).
  15. At the rear, remove the lock plate [A] (x1).
  16. Disconnect the harness near the handle (x1).
  17. Disconnect the cover plate (x4).
  18. Remove the cover plate.

  19. Remove the sensor (x1, x1).

    Double-feed Sensor 1 (Emitter)

    Double-feed Sensor 2 (Receiver)