1. Disconnect both ends of the side plate (x2).

    • When re-installing this plate, the screw must be attached at the center hole [B]. This hole is the default position.
    • The other off-set holes are used to adjust the height of the plate.

  2. Remove the plate.
  3. Remove the harness cover [A] (x1).
  4. Disconnect the thermostat [A] (x1).

  5. Remove the thermostat.

    • To prevent a fire, never attempt to reset a blown thermostat by manipulating the exposed edges of the black cover with a screwdriver, or by hitting it on a table.
    • A thermostat that has been reset manually could fail and cause a fire.
    • Always replace a blown thermostat with a new one