"Undo Exec" (SP5-873-002) lets you move back application programs from an SD card in SD Card Slot 1 to the original SD card in Slot 2 . You can use this program when, for example, you have mistakenly copied some programs by using Move Exec (SP5-873-001).

  • Do not set the write protect switch on the system SD card or application SD card on the machine.
  • If the write protect switch is on, a download error, Error Code 44, for example will occur during a firmware upgrade or application merge.

  1. Turn the machine off.
  2. Insert the SD card with the application program in Slot 1.The application program is moved from this SD card.
  3. Insert the original SD card in Slot 2. The application program is moved back to this card.
  4. Turn the machine on.
  5. Enter the SP mode.
  6. Select SP5-873-002 "Undo Exec."
  7. Follow the messages on screen to complete the operation.
  8. Turn the machine off.
  9. Remove the SD card from Slot 2.
  10. Turn the machine off.
  11. Check that the application programs run normally.