Check with your supervisor to determine if the most recent firmware needs to be installed. (Firmware Update for Peripherals)
Confirm that the operators understand the following important points:
- Decals attached to the machine provide guidance for removing paper jams. Point out the decal locations.
- Detailed instructions on removing ring jams are provided in the operating instructions under "Removing Jammed Ring Combs".
- When pulling out and pushing in the binder unit on its rails, always grip the binder unit by its handle (Mc8).
- Always grip handle Mc8 when pulling out or pushing in the binder unit.
- Never touch any other surface of the binder unit when it is moving on its rails.
- To avoid injury to the fingers, never push on the top of the binder unit to slide it back into the finisher as shown above.
- Never store paper, extra rings, manuals or any other material below the output tray. Obstacles in this area (shown in red in the illustration) will interfere with the raising and lowering of the tray and cause an error.