1. Remove the toner bottles.

  2. Press in the bottle release lever [1] of the toner bottle, and then remove the bottle [2].

    • If either bottle is locked and cannot be released by pressing the lever, do the following steps to unlock the bottle.

  3. At the back of the machine [A], insert a small screwdriver into the worm gear shaft [B] of the bottle cap motor of the toner bottle.
  4. Turn the screwdriver counter-clockwise until the arm [C] moves forward.
  5. Remove the cap from the rear end of the left toner bottle cradle [A] (x2).
  6. Disconnect the left toner bottle cradle (x3, x1).
  7. Disconnect the back of the left toner bottle cradle [A] (x2).
  8. Disconnect the front of the left toner bottle cradle [A] (x2).
  9. Slide a sheet of paper under the back of the left toner bottle cradle [A].
  10. While holding the paper under the rear end of the cradle, remove the left toner bottle cradle [A].
  11. Remove the bracket [A] from the back of the right toner bottle cradle (x3).
  12. Remove the cap from the rear end of the right toner bottle cradle [A] (x2).
  13. Disconnect the back of the right toner bottle cradle [A] (x1, x3).
  14. Disconnect the switch harness from the left side of the cradle [A] (x11).
  15. Pull the disconnected switch harness [A] to the rear.
  16. Disconnect the back of the right cradle [A] (x2).
  17. Disconnect the front of the right cradle (x2).
  18. Slide a sheet of paper under the back of right toner bottle cradle [A].
  19. While holding the paper under the rear end of the cradle, remove the right toner bottle cradle [B].