Paper dust sticking to the paper transfer guide board, roller, paper feed roller, or sensor may cause white spots, paper jam, or double feeding. Clean the paper feed path from the paper tray to the paper exit in the drawer.

  • Before cleaning always turn off the system and disconnect the main machine from its power source.
  • Allow the machine to cool for 10 minutes before you start cleaning.

  1. Guide Board. Wipe the guide board with a well-wrung-out damp cloth. To clean the innermost recesses, use a cloth that is as large as your palm.
  2. Roller. Wipe the roller with a well-wrung-out damp cloth, and then wipe with a dry, unused, lint-free cloth until no moisture remains.
  3. Paper Feed Roller. Wipe the entire surface of the paper feed roller lengthwise with a well-wrung-out damp cloth, and then wipe with a dry, unused, lint-free cloth until no moisture remains.
  4. Sensor. Remove dust with a blower brush.
  5. Antistatic Brush. Remove dust with a blower brush.