Turn on the machine and do some test prints and check for excessive curling.
- Do test prints with paper feed from each paper tray.
Back Curl [A]
Back curling (convex curling) occurs when the leading and trailing edges of the sheets curl under.
Front Curl [B]
Face curling (concave curling) occurs when the leading and trailing edges of the sheets curl up.
Curl Correction
Curl correction is done with settings in the SP mode. There are 11 SP codes for curl correction, one for each paper tray.
Paper Source | SP | Range | |
|---|---|---|---|
Tray 1 | 1st Tray: Main Machine | 1906 001 | [0 to 5 / 3 / 1] |
Tray 2 | 2nd Tray: Main Machine | 1906 002 | |
Tray 3 | 3rd Tray: Main Machine | 1906 003 | |
Tray 4 | Top Tray: LCIT | 1906 004 | |
Tray 5 | Middle Tray: LCIT | 1906 005 | |
Tray 6 | Bottom Tray: LCIT | 1906 006 | |
Tray 7 | Multi Bypass Tray: On top of LCIT | 1906 007 | |
T1 | Vacuum Feed LCIT RT5100 | 1-906-008 | |
T2 | Vacuum Feed LCIT RT5100 | 1-906-009 | |
T3 | Vacuum Feed LCIT RT5100 | 1-906-010 | |
T4 | Vacuum Feed LCIT RT5100 | 1-906-011 | |
1st Tray Main Machine: SP1906 001
This is the list of settings for Tray 1. These settings are identical for each paper tray.
Setting | Used For | Sample |
|---|---|---|
1 | Slight Front Curl | Example [B] in the illustration above. |
2 | Excessive Front Curl | |
3 | None. This is the normal default setting. | No pressure applied by the soft roller. |
4 | Slight Back Curl | Example [A] in the illustration above. |
5 | Excessive Back Curl |