• To avoid damaging the white plate, never try to peel the plate off from the upper right corner or upper left corner.

  1. Clean the white plate with a damp cloth.
  2. To remove the white plate, first insert your hand under the upper right corner, about the width of your palm, to separate the plate.
  3. Insert your hand about palm-width at the lower right corner.
  4. In the same way, separate the upper left corner [A] and lower left corner [B].
  5. Pull both sides of the plate straight off (insert your hand under the center to separate the center).
  6. If you need to remove the white plate, pull it off the Velcro fasteners.
  7. To re-attach the white plate, set the corner of the plate in the upper left corner, and then just lower the ADF.
  8. Push the release lever [A] to the left, and then open the plate [B].
  9. Clean the lower rollers with a water or alcohol dampened cloth.
  10. Open the feed cover [A].
  11. Clean the upper rollers with a water or alcohol dampened cloth.
  12. Under the original tray [B], clean the rollers with a water or alcohol dampened cloth.
  13. Raise the ADF [A].
  14. Remove the left plate (x2).
  15. Clean the scanner rollers [B] attached to the plate.
  16. Clean the other rollers where the plate was removed.