Always observe the following points when moving the Multi-Folding unit.

  • To prevent damage to the connection brackets, never attempt to move or change the position of the system with the LCT, the Multi-Folding Unit, (or any other downstream peripheral) connected.

  1. Turn the system off.
    • Press the operation power switch on the left corner of the main machine to turn the machine off.
    • The power-down alert message appears on the operation panel. Wait for the operation panel to go off.
    • Switch off the main power switch.
  2. Unplug the main machine from the power source.
    • Grip the head of the plug firmly, and then pull it out.
    • Never pull on the cord.
  3. Disconnect the unit I/F cord from the upstream unit (or main machine) and downstream unit.
  4. Make sure that the front door of the unit is closed.
  5. Disconnect the unit power plug.
    • Grip the head of the plug firmly, and then pull it out.
    • Never pull on the cord.
  6. When you move the unit:
    • Place your hands on the front left and right corners of the unit.
    • Push the unit in the direction of the arrow.
    • Pushing the unit front-to-rear prevents twisting the delicate frame of the unit.