The target fusing temperature is calculated based on the readings of themopiles above the fusing unit and other temperature sensors that monitor the temperatures of the heating roller and pressure roller. These readings are used to keep the heating roller and pressure roller at the correct temperatures for optimum performance.
In the diagram above:
- Blue line: Heating roller Temperature
Magenta line: Pressure roller temperature
Comments (Circled Numbers Above)Power on
Fusing control switches on
Reload temperature
Fusing roller rotations stop
Job setup by user, preparing to print
Permission to start printing
Switching to job paper feed mode
Job paper feed ends
Fusing roller rotation ends
Shift to low power mode
Shift to sleep mode
End
The temperature of the fusing unit is measured in the following steps.
The target temperature is set for each roller depending on detected ambient temperature as described below.
Here is the key for the Environment and Machine Types referenced in the step-by-step descriptions below.
Environments
- Environment A: Low temp.: Can adjust with SP1111-001 if Machine Temp. ≤ 17°C
- Environment B: Normal Temp. Can adjust with SP1111-001-002 if normal temp. 17C < Machine Temp. < 30°C
- Environment C: High temp.: Can adjust with SP1111-002 if 30°C ≤ Machine Temp.
- Environment A-1: Low temp.: Cannot adjust with SP if Machine temp. ≤ 10°C
- Environment B-1: Normal temp.: Cannot adjust with SP if Machine Temp. ≤ 10°C
- Environment B-2: Normal temp. 2: Cannot adjust with SP if 23°C< Machine Temp. ≤ 32°C
- Environment C-1: High Temp.: Cannot adjust with SP if 32°C ≤ Machine Temp.
Machine Type Key
Copier/Printer Model | ||
|---|---|---|
Type a: | 96 ppm | Ricoh Pro 8200EX/8200S |
Type b: | 111 ppm | Ricoh Pro 8210S/8210Y |
Type c: | 136 ppm | Ricoh Pro 8220S/8220Y |
1 Warm-up Time
Machine start-up step after power on.
- Once the set temperature is reached, after the prescribed time the sequence shifts to next step: Reload Mode.
- The tables below describe the “Set Temperature” and “Adjust Temperature” for the heating roller and pressure roller for each environment.
- The Set Temperatures and Adjust Temperatures can be adjusted with the listed SP codes.
Environment A
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1101-002 | +10°C | SP1111-003 |
Pressure | 90°C | 90°C | 90°C | SP1101-003 | +10°C | SP1111-003 |
Environment B
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1101-002 | - | - |
Pressure | 90°C | 90°C | 90°C | SP1101-003 | - | - |
Environment C
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1101-002 | - | - |
Pressure | 90°C | 90°C | 90°C | SP1101-003 | - | - |
2. Reload
After Step 1 is finished, the machine shifts to Reload mode. A message on the operation panel indicates that copying can begin, and then the machine immediately goes to the next step.
3. Roller Rotation After Reload
This step rotates the fusing belt so the heating roller can heat up the hot roller. The machine shifts to the next step Ready (Standby) mode after the time prescribed for rotation has elapsed. The tables below describe the “Set Temperature” and “Adjust Temperature” for the heating roller and pressure roller for each environment. The Set Temperatures and Adjust Temperatures can be adjusted with the listed SP codes.
Environment A
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1108-001 | +10°C | SP1111-003 |
Pressure | 90°C | 90°C | 90°C | SP1108-002 | +10°C | SP1111-003 |
Environment B
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1108-001 | - | - |
Pressure | 90°C | 90°C | 90°C | SP1108-002 | - | - |
Environment C
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1108-001 | -5°C | SP1111-004 |
Pressure | 90°C | 90°C | 90°C | SP1108-002 | -5°C | SP1111-004 |
4. Ready (Standby)
This step rotates the fusing belt so the heating roller can heat up the hot roller. The machine shifts to the next step Ready (Standby) mode after the time prescribed for rotation has elapsed. The tables below describe the “Set Temperature” and “Adjust Temperature” for the heating roller and pressure roller for each environment. The Set Temperatures and Adjust Temperatures can be adjusted with the listed SP codes.
Environment A
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 150°C | 155°C | 160°C | SP1107-001 | +10°C | SP1111-003 |
Pressure | 90°C | 90°C | 90°C | SP1107-002 | +10°C | SP1111-003 |
Environment B
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 150°C | 155°C | 160°C | SP1107-001 | - | - |
Pressure | 90°C | 90°C | 90°C | SP1107-002 | - | - |
Environment C
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 150°C | 155°C | 160°C | SP1107-001 | -5°C | SP1111-004 |
Pressure | 90°C | 90°C | 90°C | SP1107-002 | -5°C | SP1111-004 |
5. Print Preparation
When a job is set up on the operation panel in the Ready mode, the machine goes to the Print Preparation step once the fusing unit is ready to begin the job.
The tables below describe the “Set Temperature” and “Adjust Temperature” for the heating roller and pressure roller for each environment. The Set Temperatures and Adjust Temperatures can be adjusted with the listed SP codes.
Environment A
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1107-007 | +10°C | SP1111-003 |
Pressure | 90°C | 90°C | 90°C | SP1107-008 | +10°C | SP1111-003 |
Environment B
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1107-007 | - | - |
Pressure | 90°C | 90°C | 90°C | SP1107-008 | - | - |
Environment C
Roller | Set Temp. | Adjust Temp. | ||||
Type a | Type b | Type c | SP | Default | SP | |
Heating | 165°C | 170°C | 175°C | SP1107-007 | -5°C | SP1111-004 |
Pressure | 90°C | 90°C | 90°C | SP1107-008 | -5°C | SP1111-004 |
6. Before Paper Pass
This is the step between the time after [Start] is pressed and the first sheet feeds from the paper bank to the nip of the fusing unit.
Environment A-1
[*A] | User setting for each type of paper. Actual temperatures are listed. |
[*B] | Adjust Temperature. There is a default setting for each thickness, and the default can be adjusted with the SP code. |
[*C] | Adjust Temperature 2. There is a default setting for each thickness, and the default can be adjusted with the SP code. |
The target temperature for the environment is calculated [*A] + [*B] + [*C]. However, [*B] and [*C] can be calculated in the SP mode.
- The paper temperature settings can be adjusted for each tray and paper of different thickness (Thick 1 to 8).
An SP can be selected to adjust temperature [*A] (user tool paper settings) assigned for different paper thickness beforehand (allocated with Ricoh IMSS software).
Uncoated PaperRoller
[*B]
Thk
Default
SP No..
Htg R
[*A]
0
10°C
SP1-111-005
Thk 1
10°C
Thk 2
10°C
Thk 3
10°C
Thk 4
10°C
Thk 5
10°C
SP1-111-007
Thk 6
10°C
Thk 7
10°C
Thk 8
10°C
Press R
[*A]
Thk 0
10°C
SP1-111-005
Thk 1
10°C
Thk 2
10°C
Thk 3
10°C
Thk 4
10°C
Thk 5
10°C
SP1-111-007
Thk 6
10°C
Thk 7
10°C
Thk 8
10°C
Roller
[*C]
Thk
Default
SP No..
Htg R
[*A]
Normal: Thk 0
5°C
SP1-119-100
Normal: Thk 1
5°C
SP1-119-101
Normal: Thk 2
5°C
SP1-119-102
Normal: Thk 3
20°C
SP1-119-103
Normal: Thk 4
20°C
SP1-119-104
Normal: Thk 5
20°C
SP1-119-105
Normal: Thk 6
25°C
SP1-119-106
Normal: Thk 7
25°C
SP1-119-107
Normal: Thk 8
25°C
SP1-119-108
Matte: Thk 0
5°C
SP1-119-120
Matte: Thk 1
5°C
SP1-119-121
Matte: Thk 2
5°C
SP1-119-122
Matte: Thk 3
20°C
SP1-119-123
Matte: Thk 4
20°C
SP1-119-124
Matte: Thk 5
20°C
SP1-119-125
Matte: Thk 6
25°C
SP1-119-126
Matte: Thk 7
25°C
SP1-119-127
Matte: Thk 8
25°C
SP1-119-128
Gloss: Thk 0
5°C
SP1-119-140
Gloss: Thk 1
5°C
SP1-119-141
Gloss: Thk 2
5°C
SP1-119-142
Gloss: Thk 3
20°C
SP1-119-143
Gloss: Thk 4
20°C
SP1-119-144
Gloss: Thk 5
20°C
SP1-119-145
Gloss: Thk 6
25°C
SP1-119-146
Gloss: Thk 7
25°C
SP1-119-147
Htg R
[*A]
Gloss: Thk 8
25°C
SP1-119-148
Envelope: Thk 5
20°C
SP1-119-165
Envelope: Thk 6
25°C
SP1-119-166
Envelope: Thk 7
25°C
SP1-119-167
OHP 20°C SP1-119-0175 Non-carbon: Thk 0
5°C
SP1-119-180
Non-carbon: Thk 1
5°C
SP1-119-181
Non-carbon: Thk 2
5°C
SP1-119-182
Non-carbon: Thk 3
20°C
SP1-119-183
Non-carbon: Thk 4
20°C
SP1-119-184
Non-carbon: Thk 5
20°C
SP1-119-185
Non-carbon: Thk 6
25°C
SP1-119-186
Non-carbon: Thk 7
25°C
SP1-119-187
Non-carbon: Thk 8
25°C
SP1-119-188
Coated Paper
Roller
[*B]
Thk
Default
SP No..
Htg R
[*A]
Thk 0
10°C
SP1-111-009
Thk 1
10°C
Thk 2
10°C
Thk 3
10°C
Thk 4
10°C
Thk 5
10°C
SP1-111-011
Thk 6
10°C
Thk 7
10°C
Thk 8
10°C
Press R
[*A]
Thk 0
10°C
SP1-111-009
Thk 1
10°C
Thk 2
10°C
Thk 3
10°C
Thk 4
10°C
Thk 5
10°C
SP1-111-011
Thk 6
10°C
Thk 7
10°C
Thk 8
10°C
Roller
[*C]
Thk
Default
SP No..
Htg R
[*A]
Normal: Thk 0
5°C
SP1-119-100
Normal: Thk 1
5°C
SP1-119-101
Normal: Thk 2
5°C
SP1-119-102
Normal: Thk 3
20°C
SP1-119-103
Normal: Thk 4
20°C
SP1-119-104
Normal: Thk 5
20°C
SP1-119-105
Normal: Thk 6
25°C
SP1-119-106
Normal: Thk 7
25°C
SP1-119-107
Normal: Thk 8
25°C
SP1-119-108
Matte: Thk 0
5°C
SP1-119-120
Matte: Thk 1
5°C
SP1-119-121
Matte: Thk 2
5°C
SP1-119-122
Matte: Thk 3
20°C
SP1-119-123
Matte: Thk 4
20°C
SP1-119-124
Matte: Thk 5
20°C
SP1-119-125
Matte: Thk 6
25°C
SP1-119-126
Matte: Thk 7
25°C
SP1-119-127
Matte: Thk 8
25°C
SP1-119-128
Gloss: Thk 0
5°C
SP1-119-140
Gloss: Thk 1
5°C
SP1-119-141
Gloss: Thk 2
5°C
SP1-119-142
Gloss: Thk 3
20°C
SP1-119-143
Gloss: Thk 4
20°C
SP1-119-144
Gloss: Thk 5
20°C
SP1-119-145
Gloss: Thk 6
25°C
SP1-119-146
Gloss: Thk 7
25°C
SP1-119-147
Htg R
[*A]
Gloss: Thk 8
25°C
SP1-119-148
Envelope: Thk 5
20°C
SP1-119-165
Envelope: Thk 6
25°C
SP1-119-166
Envelope: Thk 7
25°C
SP1-119-167
OHP 20°C SP1-119-175
Non-carbon: Thk 0
5°C
SP1-119-180
Non-carbon: Thk 1
5°C
SP1-119-181
Non-carbon: Thk 2
5°C
SP1-119-182
Non-carbon: Thk 3
20°C
SP1-119-183
Non-carbon: Thk 4
20°C
SP1-119-184
Non-carbon: Thk 5
20°C
SP1-119-185
Non-carbon: Thk 6
25°C
SP1-119-186
Non-carbon: Thk 7
25°C
SP1-119-187
Non-carbon: Thk 8
25°C
SP1-119-188
Note
The target temperatures for “Adjust Temp. 1 (*B) and “Adjust Temp. 2 (*C) are different, so separate SP codes are provided so these adjustments can be switched on/off. For example “Adjust. Temp 2” (*C) can be used to adjust the initial temperature at the start of paper feed.
- Adjusted temperature *B: Compensates for ambient temperature (paper temperature)
- Adjusted temperature *C: Compensates for a drop in temperature at initial paper feed.
Environment B-1
The target temperatures for the heating roller and pressure roller are applied as [*A] + [*B] + [*C]. However, [*B] “Adjust Temp. 1" the default (including cases where the default has been changed in the SP mode) is calculated:
(23oC – Machine Temp.)/23oC – 10oC)
Uncoated Paper
Roller | [*B] | |||
Thk | Default | SP No. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-005 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-007 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-005 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-007 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Gloss: Thk 1 | 5°C | SP1-119-141 | ||
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Htg R | [*A] | Gloss: Thk 8 | 25°C | SP1-119-148 |
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envevelope Thk7 | 25°C | SP1-119-167 | ||
OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Non-carbon: Thk 8 | 25°C | SP1-119-188 | ||
Coated Paper
Roller | [*B] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-009 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-011 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-009 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-011 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Htg R | [*A] | Gloss: Thk 1 | 5°C | SP1-119-141 |
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Gloss: Thk 8 | 25°C | SP1-119-148 | ||
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envelope: Thk 7 | 25°C | SP1-119-167 | ||
| OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Note
The target temperatures for “Adjust Temp. 1 (*B) and “Adjust Temp. 2 (*C) are different so separate SP codes are provided so these adjustments can be switched on/off. For example “Adjust. Temp 2” (*C) can be used to adjust the initial temperature at the start of paper feed.
- Adjusted temperature *B: Compensates for ambient temperature (paper temperature)
- Adjusted temperature *C: Compensates for a drop in temperature at initial paper feed.
Environment B-2
The target temperatures for the heating roller and pressure roller are applied as [*A] + [*B] + [*C]. However, [*B] “Adjust Temp. 1" the default (including cases where the default has been changed in the SP mode) is calculated:
(Machine Temp. – 23oC)/32oC – 23oC)
Uncoated Paper
Roller | [*B] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-006 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-008 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-006 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-008 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Gloss: Thk 1 | 5°C | SP1-119-141 | ||
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Htg R | [*A] | Gloss: Thk 8 | 25°C | SP1-119-148 |
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envelope: Thk 7 | 25°C | SP1-119-167 | ||
| OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Non-carbon: Thk 8 | 25°C | SP1-119-188 | ||
Coated Paper
Roller | [*B] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-010 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-012 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-009 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-011 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Htg R | [*A] | Gloss: Thk 1 | 5°C | SP1-119-141 |
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Gloss: Thk 8 | 25°C | SP1-119-148 | ||
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envelope: Thk 7 | 25°C | SP1-119-167 | ||
| OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Note
The target temperatures for “Adjust Temp. 1 (*B) and “Adjust Temp. 2 (*C) are different so separate SP codes are provided so these adjustments can be switched on/off. For example “Adjust. Temp 2” (*C) can be used to adjust the initial temperature at the start of paper feed.
- Adjusted temperature *B: Compensates for ambient temperature (paper temperature)
- Adjusted temperature *C: Compensates for a drop in temperature at initial paper feed.
Environment C-1
The target temperatures for the heating roller and pressure roller are calculated as [*A] – [*B] + [*C].
Uncoated Paper
Roller | [*B] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-006 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-008 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-006 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-008 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Gloss: Thk 1 | 5°C | SP1-119-141 | ||
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Htg R | [*A] | Gloss: Thk 8 | 25°C | SP1-119-148 |
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envelope: Thk 7 | 25°C | SP1-119-167 | ||
| OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Non-carbon: Thk 8 | 25°C | SP1-119-188 | ||
Coated Paper
Roller | [*B] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Thk 0 | 10°C | SP1-111-010 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-012 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Press R | [*A] | Thk 0 | 10°C | SP1-111-010 |
Thk 1 | 10°C | |||
Thk 2 | 10°C | |||
Thk 3 | 10°C | |||
Thk 4 | 10°C | |||
Thk 5 | 10°C | SP1-111-012 | ||
Thk 6 | 10°C | |||
Thk 7 | 10°C | |||
Thk 8 | 10°C | |||
Roller | [*C] | |||
Thk | Default | SP No.. | ||
Htg R | [*A] | Normal: Thk 0 | 5°C | SP1-119-100 |
Normal: Thk 1 | 5°C | SP1-119-101 | ||
Normal: Thk 2 | 5°C | SP1-119-102 | ||
Normal: Thk 3 | 20°C | SP1-119-103 | ||
Normal: Thk 4 | 20°C | SP1-119-104 | ||
Normal: Thk 5 | 20°C | SP1-119-105 | ||
Normal: Thk 6 | 25°C | SP1-119-106 | ||
Normal: Thk 7 | 25°C | SP1-119-107 | ||
Normal: Thk 8 | 25°C | SP1-119-108 | ||
Matte: Thk 0 | 5°C | SP1-119-120 | ||
Matte: Thk 1 | 5°C | SP1-119-121 | ||
Matte: Thk 2 | 5°C | SP1-119-122 | ||
Matte: Thk 3 | 20°C | SP1-119-123 | ||
Matte: Thk 4 | 20°C | SP1-119-124 | ||
Matte: Thk 5 | 20°C | SP1-119-125 | ||
Matte: Thk 6 | 25°C | SP1-119-126 | ||
Matte: Thk 7 | 25°C | SP1-119-127 | ||
Matte: Thk 8 | 25°C | SP1-119-128 | ||
Gloss: Thk 0 | 5°C | SP1-119-140 | ||
Htg R | [*A] | Gloss: Thk 1 | 5°C | SP1-119-141 |
Gloss: Thk 2 | 5°C | SP1-119-142 | ||
Gloss: Thk 3 | 20°C | SP1-119-143 | ||
Gloss: Thk 4 | 20°C | SP1-119-144 | ||
Gloss: Thk 5 | 20°C | SP1-119-145 | ||
Gloss: Thk 6 | 25°C | SP1-119-146 | ||
Gloss: Thk 7 | 25°C | SP1-119-147 | ||
Gloss: Thk 8 | 25°C | SP1-119-148 | ||
Envelope: Thk 5 | 20°C | SP1-119-165 | ||
Envelope: Thk 6 | 25°C | SP1-119-166 | ||
Envelope: Thk 7 | 25°C | SP1-119-167 | ||
| OHP | 20°C | SP1-119-175 | ||
Non-carbon: Thk 0 | 5°C | SP1-119-180 | ||
Non-carbon: Thk 1 | 5°C | SP1-119-181 | ||
Non-carbon: Thk 2 | 5°C | SP1-119-182 | ||
Non-carbon: Thk 3 | 20°C | SP1-119-183 | ||
Non-carbon: Thk 4 | 20°C | SP1-119-184 | ||
Non-carbon: Thk 5 | 20°C | SP1-119-185 | ||
Non-carbon: Thk 6 | 25°C | SP1-119-186 | ||
Non-carbon: Thk 7 | 25°C | SP1-119-187 | ||
Note 1
Exercise caution in the adjustment of SP1111-006, SP1111-008. Adjusting these could affect other settings that could cause paper to curl. For example if you change SP1-111-006 to correct curl for Thk4, this change in setting could after other paper (Thk1 to Thk4) that references this setting. For example, if you adjust Thk4 to correct curl by raising the setting of SP 1-111-006, this change will also affect the settings for Thk1 to Thk4.
Note 2
The target temperatures for “Adjust Temp. 1 (*B) and “Adjust Temp. 2 (*C) are different so separate SP codes are provided so these adjustments can be switched on/off. For example “Adjust. Temp 2” (*C) can be used to adjust the initial temperature at the start of paper feed.
- Adjusted temperature *B: Compensates for ambient temperature (paper temperature)
- Adjusted temperature *C: Compensates for a drop in temperature at initial paper feed.