1. Look at the scales and check the positions of the front, back, and side fences to see what size the tray is set for.
  2. The tray can be set for only the following sizes.
    • A4 SEF/LEF
    • A3 SEF
    • B4 SEF
    • LT (8.5"x11") SEF/LEF
    • DLT (11"x17") SEF only
    • LG (8.5"x14")

    • Custom paper sizes cannot be used in this tray.

  3. If you need to adjust the positions of the side fences for the paper to be loaded in the tray, you must do this now before the tray is installed in the machine.

    • The side fences must set with the tray removed from the machine. If the tray has been installed for one paper size, it must be removed to reset the positions of the side fences for another paper size.

  4. Remove the right screws (x2).
  5. Remove the left screws [A], and then remove the front panel [B] (x2).
  6. Loosen the screw of the front fence [A] (x1).
  7. Set the fence [B] at the correct position, and then re-attach the screw (x1).
  8. Loosen the screw of the rear fence [A] (x1).
  9. Set the fence [B] at the correct position, and then re-attach the screw (x1).
  10. Loosen the screw of the side fence [A] (x1).
  11. Set the fence [B] at the correct position, and then re-attach the screw (x1).
  12. Re-attach the front panel (x4).