1. The jam LED [A] blocks the removal of the drive belt.
  2. Pull the LED off its post [B] and let it hang free. Do not disconnect it.
  3. When you set the LED on its post again [C], make sure that the connector and small black triangle are on the same side.
  4. Disconnect the motor (x1).
  5. Disconnect the belt (x1).
  6. Disconnect the motor bracket:
    [A] Left (x1)
    [B] Right (x1)
  7. Remove the bracket [A] (with motor attached).
  8. Disconnect the harness [B] (x1).
  9. Disconnect the motor (x2).
  10. Separate motor and harness.