Follow this procedure to remove the top cover of the printer model.

  1. The covers are removed in order:

    [A]

    Removal Order

    [B]

    Re-installation Order

    1

    Front frame cover (x3)

    1

    Top cover (x9)

    2

    Front edge cover (x3)

    2

    Left edge cover (x2)

    3

    Rear edge cover (x3)

    3

    Rear edge cover (x3)

    4

    Left edge cover (x2)

    4

    Front edge cover (x3)

    5

    Top cover (x9)

    5

    Front frame cover (x3)

    • Remove them in order [A], and then be sure to re-install them reverse order [B]

  2. Open the front doors.
  3. Disconnect the front frame cover (x3).
  4. Remove the front frame cover.
  5. Disconnect the front edge cover (x3).
  6. Remove the front edge cover.
  7. At the back of the machine [A], use the tip of a small driver to remove the three screw covers of the rear edge cover.
  8. Disconnect the rear edge cover (x3).
  9. Slide the cover slightly to the right to unhook it, and then remove it.
  10. Disconnect the left edge cover (x2).
  11. Slide the cover slightly to the right to unhook it, and then remove it.
  12. At the front of the machine [A], disconnect the front edge of the top cover (x4).
  13. At the back of the machine [A] disconnect the rear edge and corner of the top cover (x5).
  14. Remove the top cover.