1. Remove the front edge cover (x1). (Front Edge Cover)
  2. The PCDU is on the upper right.

  3. Lower the ITB knob.

    • Now you must remove the charge corona unit.
    • Never attempt to pull out the PCDU with the charge corona unit in the machine.
    • Pulling out the PCDU without removing the charge corona unit will damage the cleaning pad HP sensor and its harness.

  4. Press the tab [A] to release the charge corona unit.
  5. Pull the charge corona unit [B] out of the machine.

  6. Lay the charge corona unit on a flat clean surface.

    • Always lay the charge corona unit down with the grid facing up. This prevents damage to the grid wires.

  7. Remove the PCDU cover (x3).

    • You can remove the screws in any order, but you should re-attach them in the order .

  8. Turn the spoke cap counter-clockwise and then remove it.
  9. Grip the PCDU by its handle, and then pull it out of the machine until it stops.