You must do the Fiery controller settings immediately after you turn the machine on for the first time.

  • Make sure that that the Activity light on the Controller LCD is flashing green, and then go to the machine's operation panel.
  1. Wait for the "Please wait" message to go off.
  2. Press the "Fiery" tab on the LCD after the Fiery operating menu has appeared.
  3. Press the "Setup" button on the operation panel.
  4. The "Login" screen appears.
  5. Press the "Password" button to open the soft keyboard.
  6. Enter "Fiery. 1" with the soft keyboard, and then press the "OK" button.
    • Password entry is case sensitive (the machine distinguishes between lower case and upper case letters).
    • Use the "Shift" button to enter a capital letter.
  7. The setup screen appears after you enter the password correctly.
  8. Press the "WINS" button.
  9. Press the "Use WINS" button to disable this function then "Save".
  10. Press the "DNS" button.
  11. Press "Get DNS address automatically" to disable this function, and then press "Save". The button color turns gray to indicate that this button is disabled.
  12. Press "IP Address" to enter the IP address.
  13. Press "IPvd Address".
  14. Press the "Manual Configuration Button".
  15. Press the "IP Address" bar [A] to enter the IPv4 address, and then enter the IPv4 address.
    • The soft keyboard appears
    • Enter the IP address with the soft keyboard, and then press the "OK" button.
  16. Press the "Subnet Mask" bar [B] to enter the subnet mask IP, and then enter the subnet mask IP.
    • The soft keyboard appears.
    • Enter the IP address with the soft keyboard, and then press the "OK" button.
  17. Press the "Default gateway" bar [C] to enter the default gateway IP address, and then enter the default gateway IP address.
    • The soft keyboard appears.
    • Enter the IP address with the soft keyboard, and then press the "OK" button.
  18. Press the "Save" button after IP address setting has been completed.
  19. Press the "Go Back" button, then the "Exit Setup" button.
  20. Press the "Reboot Now" button.
  21. The Fiery server and copier system automatically turn off to reboot.