1. Use a pair of nippers to remove the knockout [A] covering the interface cable hole.
  2. Smooth the edges of the hole with a knife or file to prevent damage to the interface cable.
  3. Remove all visible strips of tape and cushions from the top and sides.
  4. Open the top cover [A], as well as strips of tape and cushion.
  5. Attach the shoulder screws [A] and [B] (x2: M4).
  6. Hold the inserter [A] at the back of the bookbinder.
  7. Set the keyholes of the hinge plates [B] over the heads of the shoulder screws [C].
  8. Slide the inserter forward so that the hinge plates slide under the heads of the shoulder screws.
  9. Secure the hinges with the hinge screws [D] and [E] (x2: M4).
  10. Slowly lower the inserter onto the top of the bookbinder.
  11. Confirm that the positioning pins insert smoothly and completely into their holes.
    If the positioning pin fits snugly in the hole, no adjustment is necessary.
    -or-
    If the pin does not insert completely into the hole, do the adjustment procedure in the next section.