1. Use the Notebook PC to decompress the compressed folder and then copy it to the desired directory:
    [Parameter_Setting_Tool_ver.xx].
  2. Copy the specific parameter settings file for the 3rd party vendor peripheral to the desired directory (Use the notebook PC).

  3. Remove the connector cover [A] on the serial port [B] and connect the notebook PC to it.

    • Do not discard the connector cover.

  4. Turn the AC power switch [A] ON and then turn the main power switch [B] ON.
  5. Wait until the main machine warms up.
  6. Press and hold the emergency stop switch for about 3 seconds to put the box in the write mode.

  7. When the RPIP interface box type S3 is in the write mode, the power LED and LED1 light up blue.

    • Jobs cannot be received while the box is in the write mode.