Execution Timing

Potential control is timed to execute at the following times.

Execution Timing	Conditions
Power on, or recovery from Energy Save mode after the machine has been idle for more than 6 hours.	The machine checks for any variation in the ambient conditions since the machine was last powered off, or from the time of last print job: If the idle time is greater than or equal to the threshold value of SP3530-001, or if the page count of SP3530-007, -008 is greater than or equal to the interval setting of SP3530-005, -006 at power ON. The temperature change is greater than or equal to the temperature threshold setting of SP3530-002. The change in relative humidity is greater than or equal to the relative humidity threshold setting (%RH) of SP3530-003. The change in absolute humidity is greater than or equal to the absolute humidity threshold setting (g/m³) of SP3530-004.
After the machine issued an alert to close the front doors.
During printing	The page count of SP3529-006 is greater than or equal to the interval setting of SP3533-002.
After the machine signals end of print job	The page count of SP3529-006 is greater than or equal to the job end interval setting of SP3534-002.

However, if SP3500-002, which switches image adjustment On/Off, is set to OFF, then image adjustment does not execute automatically.

Setting the following SP codes to OFF cancels image quality adjustment, so leave them set to their default ON settings.