Two guide plates are provided for the connection between the Decurl Unit and the entrance of the downstream unit. You must select the correct guide plate for the downstream peripheral unit (refer to the table below).

Peripheral Unit

Guide Plate

Multi Fold Unit FD5020

A

Cover Interposer Tray CI5030

Ring Binder RB5020

Perfect Binder GB5010

High Capacity Stacker SK5030

C

Booklet Finisher SR5060

Finisher SR5050

  1. Remove the guide plate from the right side of the downstream unit (x2).
  2. Select either entrance guide [A] or entrance guide [C] for attachment to the left side of the main machine. (See the table above.)
  3. Use the screws removed in Step 1 to fasten the entrance guide to the main machine (x2).
  4. If the first downstream unit is the Multi FoldUnit:
    • Fasten the screws at the outer (wide) holes (this is for the Multi Fold Unit only).
    • This is not done for either the Cover Interposer Tray or the Ring Binder.