• Refer to the Fiery controller service manual for more details about the installation requirements for the controller.

  1. Make sure the main power switch behind the left front door is off.
  2. Set the Fiery controller box on the floor.
  3. Connect the shielded cable to the lower network cable slot of the Fiery Controller box.

  • You must use the shielded cable provided with the accessories to connect the Fiery Controller box and the main machine.

  1. Connect the other end of the shielded cable to the controller box of the main machine. The correct connection point is marked "External CTL".
  2. Connect the cable from the client network to the upper network cable slot.