1. Remove the feed cover (Feed Cover)
  2. Remove the guide plate [A] (x3).
  3. Separate the plates.
  4. Sensors:
    Separation sensor
    Skew correction sensor
    Double-feed sensor 2 (Option)

Separation Sensor, Skew Correction Sensor

  1. Disconnect the sensor bracket [A] (x1).
  2. Disconnect the sensors (x2, x8).

Double-feed Sensor 2 (Receiver)

  • This machine is not equipped with double-feed sensors before shipping. This feature is an option for this machine that must be purchased separately and installed by a trained service technician. This sensor will not be present unless the kit has been installed.

  1. Disconnect the sensor bracket, and then remove it (x2).
  2. Disconnect the sensor (x1).
  3. Separate the sensor board and the bracket (x2).