1. Remove the PFU (PFU 1, 2, 3 Removal)
  2. The pickup roller solenoid is on top of the unit toward the rear.
  3. Remove the spring [A] (x1).
  4. Disconnect the bracket [B] (x2, x1, x2).
  5. Remove the solenoid.
  6. Separate solenoid and bracket (x2).

Re-installation

  1. When you re-install the pickup roller solenoid, make sure that the arm of the solenoid is on the lift arm of the pick-up roller shaft .

  2. Depress the pickup roller and make sure that it bounces up and down.

    • If the actuator of the solenoid is not positioned correctly, the pickup roller will catch on the frame and jam the right tandem tray when the PFU is re-installed.