1. Temperature Range
    • Allowed: 10°C to 32°C (50°F to 90°F)
    • Recommended: 15°C to 25°C (59°F to 77°F) Rh 50%
  2. Humidity Range:
    • Allowed: 15% to 80% Rh
    • Recommended: 30% to 70%
  3. Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight or strong light.)
  4. Ventilation: Air must be replaced a minimum of 3 times per hour
  5. Ambient Dust: Less than 0.10 mg/m3
  6. If the installation area has air-conditioners or heaters, put the finisher in a location that agrees with these conditions:
    • Where there are no sudden temperature changes from low to high, or high to low.
    • Where it will not be directly exposed to cool air from an air conditioner in the summer.
    • Where it will not be directly exposed to reflected heat from a heater in the winter
  7. Do not put the finisher where it will be exposed to corrosive gases.
  8. Put the finisher on a strong and level surface. The front and rear of the machine must be less than 5 mm (0.2") away from level.
  9. Do not put the finisher where there could be strong vibrations.
  10. Do not connect the finisher to a power supply shared with other electrical devices.
  11. The machine generates a strong electromagnetic field. This can cause interference with radio or television reception.