SC735-10

B

Trimming Blade Motor Error

  • After start of trimming operation, the home position is not detected within the time limit. (The first time: SC)
  • Also, when a JAM signal is sent due to overload during the trimming operation, the home position is not detected within the time limit after reverse rotation operation starts. (Regardless of whether or not recovery is successful, the first time: SC)
  • Trimming Blade Motor defective
  • Connecter disconnected
  • Overload
  • Trimming Blade HP Sensor defective
  • Main Board defective
  • Reconnect the connector.
  • Replace the connector.
  • Replace the Trimming Blade HP Sensor.
  • Replace the Trimming Blade Motor.
  • Replace the Main Board.

SC735-11

B

Press Roller Motor Error

  • When moving to the home position, home position was not detected within specified time. (The first time: jam display, the second time: SC)
  • When moving from the home position, home position was still detected after specified specified time. (The first time: jam display, the second time: SC)
  • Press Roller Motor defective
  • Connecter disconnected
  • Press Roller HP Sensor defective
  • Main Board defective
  • Reconnect the connector.
  • Replace the connector.
  • Replace the Press Roller HP Sensor.
  • Replace the Press Roller Motor.
  • Replace the Main Board.

SC735-12

B

Cut Position Motor Error

  • When moving to the home position, home position was not detected within specified time. (The first time: jam display, the second time: SC)
  • When moving from the home position, home position was still detected after specified specified time. (The first time: jam display, the second time: SC)
  • Cut Position Motor defective
  • Connecter disconnected
  • Stopper Assembly HP Sensor defective
  • Main Board defective
  • Reconnect the connector.
  • Replace the connector.
  • Replace the Stopper Assembly HP Sensor
  • Replace the Cut Position Motor.
  • Replace the Main Board.

SC735-13

B

Press Stopper Motor Error

  • When moving to the home position, home position was not detected within specified time. (The first time: jam display, the second time: SC)
  • When moving from the home position, home position was still detected after specified specified time. (The first time: jam display, the second time: SC)
  • Press Stopper Motor defective
  • Connecter disconnected
  • Press Stopper HP Sensor defective
  • Main Board defective
  • Reconnect the connector.
  • Replace the connector.
  • Replace the Press Stopper HP Sensor
  • Replace the Press Stopper Motor.
  • Replace the Main Board.