1. Align the studs on the tray cart base [A] with the holes in the brackets of the paper tray [B].
  2. Set the holes over the studs.
  3. Set the paper press lever [A] into the recessed cut-out in the paper tray.
  4. Insert the ends of the tray cart handle [A] into the handle holes. One end of the handle passes through the paper press lever on the paper tray.
  5. Lay the assembly down with the handles on the floor.
  6. Fasten the end of each handle (x 1 each, M10x25).
  7. Raise the paper tray and then tighten the screws on the handle bases (x 1 each, M4x14).
  8. Set the cart upright on its casters.
  9. Open the front door [A].
  10. Push the tray cart [B] into the unit and close the door.