• Always follow this procedure to shut down the machine before servicing.
  • Never power on the machine with the LD unit or the plastic canopy over the laser unit removed.

  1. Press and release the main power switch on the front of the machine.
  2. The machine displays a message that tells you to wait while the machine shuts down.
  3. After the message goes off, check the right side of the operation panel and confirm that all the indicators are off.

    • Never disconnect the power cord until all the indicators on the operation panel are off.

  4. Disconnect the power cord.
  5. Press and release the power switch. This dissipates residual charge from electrical components.
  6. Wait at least 10 minutes for components to cool (especially the fusing unit).