Lubricant is already applied to the following service parts at the factory, so they require no further lubrication (setting powder, yellow toner) before they are installed.
- However, you must execute SP2310-001 to force lubricant cleaning after they have been installed.
- The cleaning blade can replaced separately. It requires no lubrication, but SP2310-001 still must be done.
- The lubricant brush roller, lubricant bar, and lubricant blade are always replaced together, not separately, but SP2310-001 must be done after they are replaced.
- When the ITB unit is replaced as a unit, SP2310-001 still must be done.
Part | When Replaced Individually | When ITB Unit Replaced as a Unit | |
|---|---|---|---|
Cleaning blade*1 | SP2310-001*4 | SP2310-001*4 | |
Lubricant brush roller*3 | --- | ||
Lubricant bar *3 | --- | ||
Lubricant blade*2 *3 | SP2310-001*4 | ||
*1 | Setting power (zinc stearate) applied before shipping. | ||
*2 | Yellow toner applied before shipping | ||
*3 | Always replaced together as a set. | ||
*4 | After replacing parts, be sure to execute force lubricant cleaning (SP2310-001). | ||