Hot Roller Heating Roller Sensors, Heating Roller Thermistor

Remove the separation unit.
Remove the front and rear covers.
Remove the right cover, and the separation unit cover.
These components must be removed together:
Heating Roller Thermistor (Bracket)
Hot Roller NC Sensor (Short White Harness)
Heating Roller NC Sensor - Center (Black Harness)
Heating Roller NC Sensor - End (Long White Harness)
At the rear, disconnect the connector bracket (x2).
Inside the bracket, disconnect the top and bottom of the plastic connector cradle (x2).
Pull out the connector cradle [A], and then disconnect the harnesses [B] (x1).
Open the metal clamps to free the harnesses [A] (x2).
Disconnect the heating roller thermistor [A] (x1).
Disconnect the NC sensors on the right side of the unit [A] (x3).
Remove the harnesses and connector together.
- At re-installation, re-connect the harnesses in the correct order and location.
Heating Roller Thermistor (Bracket)
Hot Roller NC Sensor (Short White Harness)
Heating Roller NC Sensor - Center (Black Harness)
Heating Roller NC Sensor - End (Long White Harness)

	Heating Roller Thermistor (Bracket)
	Hot Roller NC Sensor (Short White Harness)
	Heating Roller NC Sensor - Center (Black Harness)
	Heating Roller NC Sensor - End (Long White Harness)