• The main machine should be installed first and adjusted to level front-to-back, and side-to-side.
  • Note the settings on the leveling gauge. Due to the length of the paper path with optional peripheral units installed, it is extremely important that every unit be leveled to match the front-to-back and side-to-side measurements of the main machine.
  • The height and level of each peripheral unit must be adjusted at installation.
  • The height and level of each unit must be adjusted before testing for the presence of skew and checking that side-to-side registration is correct.
  1. Use the wide end [A] of the accessory wrench provided with the machine to adjust the front and rear feet of the main machine.
  2. The narrow end of the wrench [B] is for the feet of the peripheral units.