• The following three items are always replaced as a set: lubricant bar, cleaning blade, and lubricant brush roller.

  1. At the front, disconnect the end of the lubricant roller [A] (x1).
  2. Remove the gear from the tip of the roller.
  3. Remove the lock plate (x1).
  4. Remove the lubricant roller.

Re-installation

  1. Before replacing the lubricant brush roller, apply setting powder to both ends of the roller [A] (about 30 mm or 1 in. from each end). This prevents the roller from catching on the blade.

    • [A] shows the minimum amount applied and [B] the maximum amount applied.

  2. Turn gear [B] in the direction of the arrow 3 to 5 times to spread the powder evenly.