Thin lines (1-dot lines in 1200 dpi images) break.

Cause:

Oblique (approximately 45°) thin lines or thin lines printed in faint colors are likely to contain breaks.

Solution:

  1. On the machine operation panel: Adjustment Settings for Skilled Operators > Image Quality > Adjust Image Density > Image Density Adjustment: Manual Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)

  2. Print the image. Is the problem resolved?

    Yes

    Finished!

    No

    Go to the next step.

  3. Increase the value by 1 in Adjust Line Width. (SP3-623-061: LD Power :Set Line Width Adj.:K)
  4. Select Adjust Image Density and execute Image Density Adjustment: Manual Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)

  5. Print the image. Is the problem resolved?

    Yes

    Finished!

    No

    Repeat Steps 3 to 5. If the problem persists even though you have increased the value to 5, consult the product specialist.