1. Controller box open (Opening the Controller Box)
  2. Controller box cover off (Removing the Controller Box Cover, Inner Cover)
  3. Loosen the screws of the metal cover (x12).
    • Do not remove the screws.
    • Each screw slides into a larger hole when the cover is pushed to the left .

  4. Slowly, slide the cover to the left and then remove it.

    As you remove the cover, carefully separate any harnesses if they are entangled with the cover.

  5. Disconnect a harness (x1, x1).
  6. Pull the disconnected harness through the top of the controller box.

  7. At the front, disconnect the ADF anchor plates [A] and [B] (x2).

    Never try to remove or loosen the large shoulder screws [A] or [B].

  8. Grip the ADF [A] from the rear.
  9. Pull it to the rear, lift it straight up, and then set it on the floor behind the machine or on a large table. Weight: approx. 14 kg (31 lb.)