1. Open the VTU (Opening the VTU)

    • If the VTU is not open, you will not be able to remove the PFU.

  2. Disconnect the PFU [A] (x1, x1).
  3. Remove the bracket [B] (x3).
  4. Disconnect the PFU at the front (x2).
  5. Swing the PFU to the right [A].
  6. Pull the PFU [B] to the front. This disengages the back of the PFU from the alignment pins and couplings at the rear.
  7. Pull the PFU out of the machine.
  8. Lay the PFU on a flat clean surface.