- When you re-install the ITB unit, if the spring catches on the unit push the spring to allow the unit to slide in.
- When you re-install the ITB unit, make sure the rails on the left [A] and on the right [B] are aligned correctly before you push the unit into the machine.
- Do not forget to re-attach the plate on the right end of the ITB unit. (This is a new part for this machine.)
- When you re-install the ITB cleaning unit, make sure that the arms on top of the unit are hung correctly onto the rails [A] before you push the unit into the machine.
- After installing the cleaning unit, rotate both levers [B] down to lock them.
Gently, rotate the ITB lever up. Do not twist!
The right front door will not close if this lever is down.
Raising this lever raises the image transfer belt up against the drum. Raise the lever slowly and gently with two fingers [A].
Never twist the lever with force [B]. This could cause a problem with the position of the belt and trigger an SC error.