1

Main Machine (Copier or Printer)

2

LCIT RT5080 (D732)

3

Bridge Unit BU5010 (D778)

4

Vacuum Feed LCIT RT5100 (D777)

5

LCIT RT5070 (D733)

6

Multi Bypass Tray BY5010 (D517)

7

Decurl Unit DU5030 (D741)

8

Transit Pass Unit for Perfect Binder S1 (D391)

9

Perfect Binder GB5010 (D736)

10

Cover Interposer Tray for Perfect Binder Type S1 (D736)

11

Cover Interposer Tray CI5030 (D738)

12

Multi-Folding Unit FD5020 (D740)

13

Ring Binder RB5020 (D737)

14

High Capacity Stacker SK5030 (D776)

15

Booklet Finisher SR5060 (D734) (Corner, center stapling)

16

Punch Unit PU 5020 - NA/EU/SC

17

Trimmer Unit TR5040 (D520)

18

Finisher SR5050 (D735) (Corner stapling only)

  • Up to two large capacity trays [2], [4], [5] with a bridge unit [3] can be installed on the right side of the machine.
  • The Vacuum Feed LCIT [2] requires the Bridge Unit BU5010 [3] to connect to another LCIT.
  • The Multi Bypass Tray [6] can be installed on the Vacuum Feed LCIT RT5100 [2], LCIT RT5080 (A3) [4], or LCIT RT5070 (A4) [5]. However, the Multi Bypass Attachment Kit for Vacuum Feed LCIT Type S3 is required for installation of the Multi Bypass Tray on the Vacuum Feed LCIT [2].
  • The Decurl Unit [7] is installed inside the left side of the main machine.
  • Either the Perfect Binder [13] or the Ring Binder [14] can be installed, but these units cannot be installed together in the same line.
  • If the Multi Folding Unit [15] is installed, the Booklet Finisher [15] or Finisher [18] must be installed as the last unit downstream.
  • The Trimmer Unit [17] can be attached only to the Booklet Finisher [15] not the Finisher [18]. (The Trimmer Unit can handle only saddle-stitched documents, not corner stapled documents.)
  • The booklet tray of the Booklet Finisher [15] must be removed in order to install the Trimmer unit [17]. If the Trimmer Unit is removed from the line, the booklet tray must be re-installed on the Booklet Finisher.