Before you begin, please note:

  • Downloading NVRAM data from an SD card may fail if the SD card is defective.
  • If downloading NVRAM data from an SD card fails, just repeat the procedure.
  • If the second attempt to download from the SD card fails, then you must enter the SP and UP settings manually from the SMC report you printed before uploading the NVRAM data to the SD card.
  1. Turn the machine off.
  2. Remove the SD slot cover.
  3. Insert the SD card that holds the NVRAM data in Slot 2 [A].

    • The machine number included in the filename of the file on the SD card must match the number of the machine.

  4. Turn the machine on.
  5. Enter the SP mode and open SP5825.
  6. Touch [EXECUTE]. The download executes.
  7. When the prompt that tells you that the operation has completed and that the machine must be re-booted, touch [Exit].
  8. Exit the SP mode and remove the SD card.
  9. Cycle the machine off/on.