After installing the EPDM rollers, sliding the reverse roller gear 10 mm toward the front can improve paper feed.

  • The service life of each EPDM roller is 300K. This is shorter than the service life of the urethane rollers (1000K). Replace the standard urethane rollers with the EPDM rollers only if the customer is experiencing serious paper feed problems.

If no-feed jams start to occur before the EPDM rollers have reached the end of their service life, clean the rollers.

  1. Remove the three rollers (pick-up, feed, and separation roller).
  2. Moisten a clean cloth with some water.
  3. Slowly wipe the surface of each roller in the direction of the arrows as shown to remove the paper dust.
  4. Allow the rollers to dry completely before you re-install them in the machine.