The toner shield glass should be inspected and cleaned.

  1. Disconnect the front edge cover at the three points [A], [B], [C] (x3).
  2. Remove the front edge cover.
  3. Lower the image transfer belt.

  4. Remove the PCDU cover (x3).

    • The screws can be removed in any order, but they must be re-installed in the order .

  5. Locate the plastic strip.
  6. Pull out the strip [A], and then slowly pull it to remove the toner shield glass [B].
  7. Lay the toner shield glass on a flat clean surface for inspection and cleaning with a lens cloth.