1. Remove the rear cover. (Rear Cover)
  2. Remove the left cover. (Left Cover)
  3. With the rear cover removed, the motor is partially visible behind the heat pipe cooling fan duct.
  4. At the left rear edge, remove the duct (x2).
  5. Disconnect the fan duct (x3, x2)
  6. Disconnect the duct (x3).
  7. Remove the duct.
  8. With the duct removed, you can see the motor.
  9. Open both front doors and pull the front drawer far enough so that you can see the plastic cage from the open left side of the machine.
  10. Release the plastic tabs [A], and then remove the cage [B].
  11. Push in the front drawer completely so that you can see the motor at the rear.
  12. Disconnect the motor:
    [A] Upper right (x1)
    [B] Lower left (x1)
  13. Pull the motor out [A] partially, and then disconnect it [B] (x1).
  14. Remove the motor.