1. Open the controller box. (Opening the Controller Box)
  2. Remove the rear cover. (Rear Cover)
  3. Remove the vertical stay (x3).
  4. Disconnect the motor harness [A] (x1, x1).
  5. Open the clamps [B] (x3).
  6. Inside the machine, disconnect and free the harness, and then disconnect the motor bracket [A] (x1, x1, x1).
  7. Carefully, pull the harnesses [B] away from the side of the duct.
  8. Disconnect the top of the duct bracket x2).
  9. Disconnect the bottom of the duct at the left corner [A] and the right corner [B] x2).
  10. Remove the vertical duct.
  11. Disconnect the motor (x1, x1, x2).
  12. Remove the motor.