• SP2-220-001 Charger Cleaner Operation Start
    Executing this SP code cleans the charge wire automatically.
  • SP2-221-001 Charge Operation Mode

Allows selection of the timing for automatic cleaning of the charge corona wires.

0:

No cleaning, charge corona wires can be cleaned by execution of SP2-220 only.

1:

Cleaning done when process control is executed after the prescribed number of prints (p). Wire cleaning precedes process control execution. Executes based on the number of pages prescribed by SP2-221-002.

2:

Cleaning executes automatically after the count exceeds the prescribed number of pages, at the end of job in progress. Executes based on the number of pages prescribed by SP2-221-002. Default: 6,000 prints

  • SP2-221-002 Charger Cleaner Operation Interval
    This SP specifies the number of pages (p) for the charge wire cleaning interval.
    Default: 6,000 pages Range: 100 to 100,000 pages Step: 100 pages
  • SP2-221-003 Charge Cleaner Count Display
    Displays the total number of cleanings, both automatic and those done with SP2200-001.
  • SP2-221-004 Charge Cleaner Count Clear
    This SP clears the charge cleaner count displayed by SP2-221-003. Clears the count for the number of cleanings performed after the charge cleaner unit is removed and then re-installed in the machine. This counter should be cleared immediately after charge unit or corona wire replacement.