- Remove the rear cover. (Rear Cover)
- The fan is located in the horizontal duct at [A].
- Disconnect the fan harness (
x2,
x1).
Remove the cover vertical screws (
x2).
- These are narrow pitch machine screws. Be sure to re-install them at the same location.
Remove the cover wing screws (
- These are wide pitch tapping screws. Be sure to re-install them at the same location.
- Separate the cover [A] and harness, and then remove the cover.
- Slowly, slide the fan [B] out.
- Separate fan [A] and bracket (
- When you re-assemble the fan and bracket, position the fan as shown with its label [B] up.
- Align the tabs and slots on the left, and then slowly insert the fan bracket.