- One Vacuum Feed LCIT attached
Skew can be corrected at the pin [A] and bracket [B] between the main machine and LCIT with insertion of an accessory skew correction shim [C]. Two Vacuum Feed LCIT attached
If more than one LCIT is in the line, the skew correction can be done with the correction shim at the connection between the main machine and LCIT closest to the main machine.- Each skew correction shim is 1.0 mm thick. Inserting one shim is equivalent to about 0.25/100 mm of correction in paper skew.
- Up to four shims can be inserted to correct skew.