Space Around the Main Machine

The illustration above is a top view of the main machine. This illustration is not drawn to scale. Measurements are rounded up slightly, but they will allow you to estimate how much space will required to work around the machine and service the machine without moving it.

• Approximately 620 mm (25 in.) clearance required behind the machine with the control box open.
• Approximately 700 mm (28 in.) at the front of the machine with both front doors open and the drawer pulled out.
  

  No.	Part	Range of Movement
  1	Front Doors	Both doors swing open to the front
  2	Main Machine	Remains stationary.
  3	Controller Box	Swings open to the rear
  4	Front Drawer	Pulls out to the front for servicing (fusing unit, registration unit, PTR unit, PTB unit etc.)

• The controller box is on hinges and can be swung open to the rear in order to service parts on the back of the machine (motors, sensors, etc.).
• The front doors swing open to the front, and then the front drawer can be pulled out the front of the machine on rails for servicing.