- Enter the SP mode and select SP2-109-003 (Pattern Selection).
- Select the test pattern for print from the list then press [OK].
To change the density of the test pattern, select the density with SP2-109-006, then press [#].
- If select "0" with SP2-109-006, the color adjusted so will not show up in the test pattern.
- To print, touch [Copy Window], then set settings within the following window for test print (paper size, etc.).
- Press [Start] to start test print.
- After checking the test pattern, press [SP Mode] to return to SP mode display.
- Reset all settings to the default values (SP2-109-003, SP2-109-006).
- Exit SP mode.
| No. | Pattern | No. | Pattern |
|---|---|---|---|
| 0 | None | 12 | Independent Pattern (2 dots) |
| 1 | Vertical Line (1 dot) | 13 | Independent Pattern (4dot) |
| 2 | Vertical Line (2 dots) | 14 | Trimming Area |
| 3 | Horizontal Line (1 dot) | 15 | Hound's Tooth Check (Horizontal) |
| 4 | Horizontal Line (2 dots) | 16 | Hound's Tooth Check (Vertical) |
| 5 | Grid Vertical Line | 17 | Black Band (Horizontal) |
| 6 | Grid Horizontal Line | 18 | Black Band (Vertical) |
| 7 | Grid Pattern Small | 19 | Checker Flag Pattern |
| 8 | Grid Pattern Large | 20 | Grayscale (Vertical) |
| 9 | Argyle Pattern Small | 21 | Grayscale (Horizontal) |
| 10 | Argyle Pattern Large | 22 | Two Beam Density Pattern |
| 11 | Independent Pattern (1 dot) | 23 | Full Dot Pattern |